Agriculture, mainly those in the poultry industry need an effective way to remove the feathers from the chicken. This will result in convenience and speed for them especially when they have a huge order from their clients that needs to be delivered fast. There is therefore the need for them to know how to make a chicken plucker as it will achieve the desired results in a timely manner. It is cheaper to use as there are no laborers to be paid.
Just like any other task, having the right tools and equipment is the first step. They should be properly functional and assembled at the workshop before the work commences. Do all purchases in advance of those that are not readily available within the locality for example screws and the fingers. If the farmer is constructing it for the first time, they could seek advice and lessons from those who have been through the process before.
Since the process involves many potentially dangerous activities, it is advisable to have shielding garments for example gloves, welding glasses, an overall and so on. These will make sure that all the parts of the body are free from injuries. These shielding clothes should be put to use when using the machine to avoid stains from the feathers. A board cut to size is fit with a carpet on the sides and secured with small nails. This is where the motor is secured.
Get another smooth board cut to required size, and have four perforations on which the engine will be secured on. This piece of wood and the first are put together and the motor placed on its place. The smoothness of the wood must be a priority.
Design another piece of wood, six by seven inches in size. Cut it at forty five degrees on the edges. Attach this to the second piece of wood. Opposite to the motor, mount the electrical box. Thereafter, wire firmly the motor, cord and switch together.
The equipment is now ready to insert the fingers. This is done from the inside towards the outside. The holes in which the fingers are put in are made close together, that is if the cap is small. They are put far apart if it is big. This is done all round and all the way to the top. Make sure that they are tightly fixed so that they do not come off during the process of plucking of the chicken.
Locate the center of the cap, be very accurate. On that spot, create a hole that will provide a balanced support for the cap so that it will be able to rotate well. Using a welding machine, attach the rod on one side of the fan motor. Then mount the collar on the motor. Tightly fasten the cap on the edge of the rod with nuts.
It is a long process that should be carried out carefully to achieve the desired results. The best way to learn is first watch others do it and then try it out. If there is any difficulties encountered, consult a person who knows how to make a chicken plucker and they will be able to assist. This is a good source of income as they can be sold out to other farmers who do not have the time to make the machine.
Just like any other task, having the right tools and equipment is the first step. They should be properly functional and assembled at the workshop before the work commences. Do all purchases in advance of those that are not readily available within the locality for example screws and the fingers. If the farmer is constructing it for the first time, they could seek advice and lessons from those who have been through the process before.
Since the process involves many potentially dangerous activities, it is advisable to have shielding garments for example gloves, welding glasses, an overall and so on. These will make sure that all the parts of the body are free from injuries. These shielding clothes should be put to use when using the machine to avoid stains from the feathers. A board cut to size is fit with a carpet on the sides and secured with small nails. This is where the motor is secured.
Get another smooth board cut to required size, and have four perforations on which the engine will be secured on. This piece of wood and the first are put together and the motor placed on its place. The smoothness of the wood must be a priority.
Design another piece of wood, six by seven inches in size. Cut it at forty five degrees on the edges. Attach this to the second piece of wood. Opposite to the motor, mount the electrical box. Thereafter, wire firmly the motor, cord and switch together.
The equipment is now ready to insert the fingers. This is done from the inside towards the outside. The holes in which the fingers are put in are made close together, that is if the cap is small. They are put far apart if it is big. This is done all round and all the way to the top. Make sure that they are tightly fixed so that they do not come off during the process of plucking of the chicken.
Locate the center of the cap, be very accurate. On that spot, create a hole that will provide a balanced support for the cap so that it will be able to rotate well. Using a welding machine, attach the rod on one side of the fan motor. Then mount the collar on the motor. Tightly fasten the cap on the edge of the rod with nuts.
It is a long process that should be carried out carefully to achieve the desired results. The best way to learn is first watch others do it and then try it out. If there is any difficulties encountered, consult a person who knows how to make a chicken plucker and they will be able to assist. This is a good source of income as they can be sold out to other farmers who do not have the time to make the machine.
No comments:
Post a Comment